User's Manual

36 Installation Manual
Cleaning the NURIT 8000
To c l e a n t h e N U R I T 8000:
• Gently wipe off dirt from the terminal with a soft, damp,
lint-free cloth.
• A very mild dishwashing detergent can be used to dampen
the cloth.
• Alcohol or alcohol-based cleansers may also be used for
stains that are more difficult.
• If available, a low-pressure blower can be used to remove
dirt or debris accumulated around the keypad buttons and
within the paper roll compartment.
• If possible, use a lens blower to remove dust and dirt from
the LCD touch screen.
• When necessary, gently wipe the touch screen with a soft
cloth or eyeglass lens wiper.
Cleaning the Printer
To clean the printer:
1. Disconnect the terminal from the power supply.
2. Open the paper roll compartment cover.
3. Carefully lift the paper roll and remove any excess pieces
of paper or dirt that might be lodged in the compartment.
If available, use a low-pressure compressed air gun.
4. Replace the paper roll.
5. Close the paper roll compartment cover.
Caution
• Never use abrasive compounds or solvents,
thinners, benzene or synthetic cleansers as
they may distort or damage the plastic and
critical parts.
• Never clean the keypad with liquids. Use
only a lightly dampened cloth or soft
brush.
• Never rub or strongly press on the LCD
touch screen.