User's Manual
Table Of Contents
- Wireless Palmtop Solution
- Foreword
- Table of Contents
- List of Figures
- 1. Product Regulatory Information
- 2. General Safety Instructions
- 3. Specifications
- 4. Initial Setup
- 5. Optional Accessories
- 6. General Features
- 7. Installing the Battery Pack
- 8. Connecting the NURIT 8000 to an AC Power Outlet
- 9. Installing the External Modem
- 10. Connecting the Car Adapter
- 11. Loading Paper in the Printer
- 12. Installing the Keypad Privacy Shield
- 13. Installing a SIM, SAM, or SD/MMC Card
- 14. Connecting Peripheral Devices
- 15. Connecting a Cellular Headset
- 16. Care and Maintenance
- 17. Troubleshooting
- Appendix A: Using the Magnetic Card Reader
- Appendix B: Using the Smart Card Reader
- Contact Information
Installation Manual 43
Appendix B: Using the Smart Card
Reader
To use the smart card reader:
1. Hold the smart card with the metal chip facing upward
and directed toward the opening of the smart card reader
at the front of the NURIT
8000.
2. Insert the card into the smart card reader slot.
Figure B-1 Smart Card Reader
3. Remove the card when prompted by the terminal,
depending on the specific application being used.
Note
For guidance, a pictogram near the card slot
indicates how to insert the smart card into the
smart card reader. In addition, insertion
direction arrows may be engraved or inscribed
on the smart card.