User Manual

Installation Manual 43
Installing the SIM/SAM Cardholder
Compartment Cover
After installing the SIM/SAM card(s), you
can cover the cardholders with the supplied
plastic cover. You can also protect this
cover from being opened by sticking the
included void label over the cutout in the
cover.
To install the SIM/SAM cardholder
compartment cover:
1. Carefully hold the terminal facedown
or place it on a soft, smooth surface so
as not to damage the LCD touch
screen.
2. Press and lift the locking tab on the
battery pack to release it from the
compartment.
See Figure 8
Battery Pack Removal
.
3. Remove the battery pack from the
terminal.
4. Insert the two square tabs at the top
of the plastic cover beneath the upper
wall of the SIM/SAM cardholder
compartment.
5. Press down on the bottom of the cover
until the two tabs snap into place
under the lower wall of the SIM/SAM
cardholder compartment.