User's Manual

Installation Manual 15
Initial Setup
Unpacking the Box
To unpack the box:
1. Place the box right side up on a stable,
flat surface.
2. For secure models of the NURIT 8000,
verify that the Secure Device label that
seals the box is intact.
Figure 2 Secure Device Label
Caution
If the Secure Device label is
damaged or missing, do not open
the box. This could be an
indication of device tampering and
may affect the validity of the
warranty for the device. Notify
your Lipman distributor.
3. For secure models of the NURIT 8000,
peel off or cut through the Secure
Device label.
4. Open the front flap of the box.