User's Manual

Installation Manual 37
Loading Paper in the
Printer
To load a roll of thermal paper in the
printer:
1.
Place the terminal on a flat, stable
surface.
2. Press the paper roll compartment cover
release button in the direction indicated
by the displayed arrow.
3.
Fully open the paper roll compartment
cover.
4. Remove the paper roll spindle from the
paper roll compartment
5. Remove the tape strip from a new
thermal paper roll.
6. Insert the paper roll spindle into the
new paper roll.
7. Unroll approximately 5 cm (2 inches) of
paper to facilitate the loading process.
8. While holding the roll, place the spindle
in into the slots on each side of the
paper roll compartment.
9. Ensure that the paper roll feeds from
the bottom.
10. Approximately 2.5 cm (1 inch) of paper
should extend out of the paper roll
compartment between the cover and the
paper tear bar.