User's Manual

Installation Manual 45
Installing the SIM/SAM Cardholder
Compartment Cover
After installing the SIM/SAM card(s), you can
cover the cardholders with the supplied
plastic cover. You can also protect this cover
from being opened by sticking the included
void label over the cutout in the cover.
To install the SIM/SAM cardholder
compartment cover:
1.
Carefully hold the terminal facedown or
place it on a soft, smooth surface so as
not to damage the LCD touch screen.
2. Press and lift the locking tab on the
battery pack to release it from the
compartment.
See Figure 8 Battery Pack Removal.
3. Remove the battery pack from the
terminal.
4. Insert the two square tabs at the top of
the plastic cover beneath the upper wall
of the SIM/SAM cardholder
compartment.
5. Press down on the bottom of the cover
until the two tabs snap into place under
the lower wall of the SIM/SAM
cardholder compartment.