User's Manual

NURIT 8400
Installation Manual 9
When not operated from its hand-held position, place the
NURIT 8400 on a flat table or countertop close to a power
outlet and any peripherals.
Maintain good ventilation around the terminal. Provide for
at least 22 cm (8.5 in) of clear space around the terminal in
its fixed operating location.
Do not cover the terminal.
Warning
Do not locate the POS terminal where it can exposed
to the following:
Devices that radiate excessive electrical noise or
voltage fluctuations, such as air conditioners, fans,
electric motors, neon signs, or high-frequency
security devices.
Water containers, such as a sink, a laundry tub or
a pool.
Areas of excessive moisture, heat, oil, dust or
debris.
Direct sunlight or objects that radiate heat.
Metal partitions or such obstructions that may
disrupt radio transmission or reception if your
terminal is used as a wireless device.
Caution
The NURIT 8400 should not be powered or charged
outdoors using its AC/DC adapter.
Caution
Some NURIT 8400 may have an optional internal radio
installed. If you are operating a terminal with this
feature, do not operate on a metal plate or near
metallic objects.
Note
Before using the NURIT 8400, remove the transparent
plastic membrane that covers the LCD screen.