User's Manual

NURIT 8400
14 Installation Manual
6. Removing and Replacing the Cable
Compartment Cover
The cable connection panel on the NURIT 8400 is located on
the bottom of the base unit, behind a cover for the cables. The
cables cover must be removed before you can connect the
terminal to the power supply, telephone line, or peripheral
devices.
To remove the cable compartment cover:
1. Carefully hold the NURIT 8400 face down or place it on a
soft, smooth surface, so as not to damage the LCD display.
2. Steady the unit with one hand, with the bottom of the
terminal facing you.
3. On the cable compartment cover, place a finger in the
groove of each of the two locking tabs.
Figure 6-1 Opening the Cover Locking Tabs
4. Pull and lift the cover, exposing the terminal connectors.
5. Remove the connectors cover.
Figure 6-2 Lifting the Cable Compartment Cover