User's Manual

NURIT 8400
Installation Manual 17
7. Connecting to the Power Supply
To connect the NURIT 8400 to the power supply:
1. Remove the cable compartment cover, as described in
“Removing and Replacing the Cable Compartment Cover”
on page 14.
2. Connect the barrel plug on the AC/DC Power Adapter cable
to the connector labeled PWR on the rear panel of the
terminal.
3. Connect the other end of the AC/DC Power Adapter cable to
an electrical power outlet.
4. Replace the cable compartment cover, as described on
page 15.
Warning
Use only the VeriFone supplied AC/DC Power Adapter
to power the NURIT 8400.
Warning
Do not plug the AC/DC Power Adapter into an outdoor
electrical power outlet.
Caution
Disconnecting the terminal from the power outlet will
disrupt the transaction process.