User's Manual

NURIT 8400
Installation Manual 23
To connect the NURIT 8400 to an RS-485 LAN:
1. Disconnect the AC/DC Power Adapter from the electrical
power outlet.
2. Remove the cable compartment cover, as described in
“Removing and Replacing the Cable Compartment Cover” on
page 14.
3. Connect the network cable to the RS-485 connector on the
connections panel.
4. Connect the other end of the network cable to a network
wall outlet, switch, or other compatible network device.
5. Replace the cable compartment cover, as described on
page 15.
6. Reconnect the AC/DC Power Adapter to the electrical
power outlet.