User's Manual

NURIT 8400
Installation Manual 25
12. Connecting Peripheral Devices
Models of the NURIT 8400 may include ports, allowing
connection of the terminal to external devices, such as:
• RS-232 connector
• USB connector
Caution
• Turn off the POS terminal, ECR, or PC whenever
you connect or disconnect the NURIT 8400.
• Do not disconnect the NURIT 8400 when the POS
terminal, ECR, or PC is processing data.
Caution
You can connect to up to four external peripheral
devices to the NURIT 8400. Consult with your
VeriFone service provider for information about the
peripheral devices that you can connect to your
specific model.
Note
Peripheral devices may require special adapter cables
for their connection to the NURIT 8400. In addition,
certain peripheral devices require an external power
supply.
Refer to the product documentation of the specific
peripheral devices, or contact your local VeriFone
representative or service provider for further details.
Note
USB peripheral support requires the installation of a
corresponding driver.
Note
The COM1 port provides a power supply for peripheral
devices. The power supply is 6 VDC (minimum)-9 VDC
(maximum) at 250 mA. This also applies to the
model-dependent COM2 port, when there is no PIN pad
connection.