User's Manual

NURIT 8400
Installation Manual 31
14. Installing and Removing the Keypad
Privacy Shield
To install the keypad privacy shield:
1. Place the terminal on a flat, stable surface, or hold it
securely in one hand.
2. Hold the keypad privacy shield above the terminal.
3. Tilt one side of the keypad privacy shield downward at an
angle of approximately 30
°.
Figure 14-1 Installing the Keypad Privacy Shield
Note
The keypad privacy shield is included only with models
of the NURIT 8400 that are designed for secure PIN
entry.
Note
In addition to the installation of the keypad privacy
shield, the cardholder must be clearly instructed to
obstruct visual observation of the PIN entry with
his/her body and hand. (See “Selecting a Point-of-Sale
Location” on page 8.)
Failing to install or removing the keypad privacy
shield, or failing to instruct the cardholder to obstruct
visual observation of the PIN entry with his/her body
and hand, may render the terminal non-compliant with
ISO 9564 for PIN protection and may violate card
association requirements for PIN entry devices.