User's Manual

NURIT 8400
32 Installation Manual
4. Insert the curved tab on the back side of the keypad privacy
shield into the circular opening positioned on either side of
the terminal (on either side of the top of the keypad area).
5. Push down on the same side’s front of the keypad privacy
shield, until the front tab snaps into place.
6. Position the second tab, at the front of the terminal, into the
tab slot.
7. Push down on the remaining corner of the keypad privacy
shield, until it snaps into place.
To remove the keypad privacy shield:
1. Place the terminal on a flat, stable surface, or hold it
securely in one hand.
2. Grasp either side of the keypad privacy shield.
3. Squeeze and pull on a diagonal one of the back side tabs of
the privacy shield until the back side tab releases.
4. Pull the keypad privacy shield away from the terminal.