User's Manual

NURIT 8400
38 Installation Manual
17. Installing SIM, SAM, and
SD/MMC Cards
Depending on the particular model, you can install a variety of
electronic memory or processing cards in the NURIT 8400:
• Up to four (4) SAM (Secure Access Module) cards can be
installed in SAM cardholders (2, 4), located on the
NURIT 8400’s SAM-SD/MMC adapter. SAM cards may be
used to hold encryption keys, identify the terminal or
merchant to the host, process applications, or a variety of
other uses.
• One (1) SD (Secure Digital) or MMC (Multi-Media Card)
cards, alongside up to two (2) SAM cards (0, 2). SD and
MMC cards hold data, such as price lists and offline
transaction information, where supported by the
application.
With any of these options, you can install a SIM Card for your
wireless transactions.
.
Installing and Removing the SAM-SD/MMC
Adapter
Before using a terminal with SAM and/or SD/MMC cards, the
adapter must be installed.
To install the SAM-SD/MMC adapter:
1. Remove the battery/SAM-SD/MMC compartment cover, as
described in “Removing and Replacing the Battery/SAM-SD/MMC
Compartment Cover” on page 33.
2. If required, install the battery, as described in “Installing and
Removing the Battery” on page 35.
Caution
Do not store any foreign objects in the
battery/SAM-SD/MMC adapter compartment.
Caution
The contacts on the SAM, SIM, SD/MMC, and
cardholders can be easily damaged. Do not bend or
scratch when installing or removing the cards.