User's Manual

NURIT 8400

Installation Manual 39

3. Hold the SAM-SD/MMC adapter with the cardholders

facing upwards, and connector towards the terminal socket.

4. Hold the SAM-SD/MMC adapter on a 30° angle, so that the

front tabs, on both the right and left of the board are in the

front slots.

5. Gently push the adapter down, resting it in the grooves on

the sides of the compartment.

6. Slide the adapter forward, until the locking button locks

into place.

7. Replace the battery/SAM-SD/MMC compartment cover, as

illustrated in Figure 15-2 on page 34.

Figure 17-1 Installing the SAM-SD/MMC Adapter

To remove the SAM-SD/MMC adapter:

1. Remove the battery/SAM-SD/MMC compartment cover, as

described in “Removing and Replacing the Battery/SAM-SD/MMC

Compartment Cover” on page 33.

2. Press the adapter connector down, unlocking the adapter

from the socket.

3. Slide and lift the SAM-SD/MMC adapter out of the

compartment.

1 Locking button 2 Right insertion groove

3 Front right insertion tab 4 Locking button hole

5 Back right insertion tab 6 Left insertion groove

7 Front left insertion tab 8

SAM-SD/MMC adapter

connector

9 Back left insertion tab