User's Manual

NURIT 8400

Installation Manual 41

Figure 17-3 SAM Cardholder Locking-Clasp

3. Lift the cardholder on its hinge to an upright position.

4. Hold the SAM card so that its chip side is facing down

towards the contacts on the reader.

5. Insert the end closest to the chip on the SAM card into the

cardholder.

Figure 17-4 SAM Card Installation

1 Locking clasp

Note

Make sure that you first slide the end closest to the

chip on the card into the grooves of the holder.

1 SAM card 2 Beveled corner

3 Metal contacts 4 Triangular protrusion