User's Manual

NURIT 8400
48 Installation Manual
The magnetic stripe card reader does not function properly
1. Verify that the card has been swiped with its magnetic stripe at
the bottom and at the lower edge of the card. See Figure A-1
on page 49.
2. Swipe the magnetic stripe card in the opposite direction.
3. If possible, try using a different magnetic stripe card.
4. If the problem persists, contact an authorized service
representative.
The smart card reader does not function properly
1. Verify that the chip end of the smart card is fully inserted with the
chip side facing up. See Figure B-1 on page 50.
2. If possible, try using a different smart card.
3. If the problem persists, contact an authorized service
representative.