User's Manual

NURIT 8400
50 Installation Manual
Appendix B: Using the
Smart Card Reader
The EMV-compatible smart card reader is located at the front
end of the NURIT 8400.
To use the smart card reader:
1. Hold the smart card horizontally, with the metal chip facing
up and directed towards the NURIT 8400.
2. Insert the card into the smart card reader slot.
3. Remove the card when prompted by the POS terminal,
depending on the specific application being used.
Figure B-1 Using the Smart Card Reader
Note
For guidance, a pictogram near the card slot indicates
how to insert the smart card into the smart card
reader. In addition, insertion direction arrows may be
engraved or inscribed on the smart card.