Installation guide

INSTALLATION GUIDE 9
CHAPTER 2
Terminal Setup
This chapter describes the terminal setup procedure. You will learn how to:
• Select a location and protect the terminal from adverse Environmental
Factors. See Select Terminal Location.
• Unpack the shipping carton. See Unpack the Shipping Carton.
• Examine terminal features. See Examine Terminal Features.
• Establish telephone line connections. See Establish Telephone Line
Connections.
• Install paper roll in the printer. See Install Paper Roll.
• Configure optional peripheral devices. See Connect Optional Device(s).
• Establish power connections. See Connect Terminal Power Pack.
• Conduct credit/debit transactions. See Use Magnetic Card Reader.
Select Terminal
Location
Use the following guidelines to select a location for the Omni 3200SE/3210SE
terminal.
Ease of Use • Select a location convenient for both merchant and cardholder.
• Select a flat support surface, such as a countertop or table.
• Select a location near a power outlet and a telephone/modem line connection.
For safety, do not string the power cable in a walkway or place across a
walkway on the floor.
Environmental
Factors
• Do not use the terminal where there is high heat, dust, humidity, moisture, or
caustic chemicals or oils.
• Keep the terminal away from direct sunlight and anything that radiates heat,
such as a stove or a motor.
• Do not use the terminal outdoors.
NOTE
When using the Omni 3200SE/3210SE terminal with the optional swivel stand,
make sure there is enough space on the countertop or table so that the terminal
can rotate freely.
CAUTION
The terminal is not waterproof or dustproof, and is intended for indoor use only.
Any damage to the unit from exposure to rain or dust can void any warranty.