Specifications

Omni 3200 Reference Manual
88 Operating System Downloads
Table 23 Direct Operating System Download
Display Action
1. (Application Prompt)
(or)
DOWNLOAD NEEDED
Disconnect the power supply from the terminal.
Hold down the [CLEAR] key and reconnect the power
supply to the terminal.
2.
ENTER PASSWORD
When the terminal beeps, release the [CLEAR] key.
The
ENTER PASSWORD
prompt is displayed. Key
in the System Password and press [FUNC/ENTER].
NOTE: If the Omni 3200 you are preparing for the
direct operating system download does not have an
application program loaded in its memory
(
DOWNLOAD NEEDED
), you must still key in the
System Password to continue with this procedure. The
default password, which is pre-set at the factory is
[1] [ALPHA] [ALPHA] [6] [6] [8] [3] [1].
3.
DOWNLOAD Y=1 N=2
(then)
SYSTEM_MODE
(If you press [2])
To continue the download procedure, press [1]. Or, to
stop the procedure, press [2].
NOTE: If you press [2], you stop the download
procedure and return to System Mode, as indicated by
the
SYSTEM_MODE
message. At this point, you can
press [1] to display the EPROM creation date (12/04/98
DM, for example) and the bootloader version ID
(VPZ06LA1, for example).
At this point, you can select another System Mode
function or press [CLEAR] two times to exit the
procedure and return to the Application Prompt (or to
the
DOWNLOAD NEEDED
prompt if the terminal
has no application).
O3200 RM Book.book Page 88 Thursday, April 29, 1999 3:48 PM