Specifications

Omni 3200 Reference Manual
92 Operating System Downloads
Setting Up the Terminal (ZONTALK)
To prepare the receiving terminal for an operating system download
by telephone, you must store variable data under the following
required record keys in the terminal’s CONFIG.SYS file:
• *OS = Name of operating system to download
• *OT = Serial number of operating system to download
• *OD = Device (COM port) for ZONTALK to use (1–4)
• *OP = ZONTALK host telephone number
• *OR = Baud rate code
(0=300, 1=600, 2=1200, 3=2400, 4=4800, 5=9600, 6=19,200)
Appending an Application Download to the Procedure
If you intend to execute an application download by telephone
immediately following the operating system download, be sure to set
the appropriate parameters in the CONFIG.SYS file.
For ZONTALK, the relevant parameters are as follows:
• *ZD= The modem port to use for the application download
(DEV_MODEM).
• *ZP= ZONTALK host telephone number
• *ZT= ZONTALK terminal ID
• *ZR= ZONTALK baud rate
• *ZA= ZONTALK application ID
O3200 RM Book.book Page 92 Thursday, April 29, 1999 3:48 PM