Specifications

Performing Downloads
Operating System Downloads 95
4.
SYSTEM=
(then)
(Bootloader version ID
)
(then)
OPSYS NEEDED
ENTER * / 0 / #
If you select the [1] option in Step 3, the terminal’s
bootloader firmware executes and you see the
SYSTEM=
message, followed by the bootloader’s
version ID (for example, VPZ06AO0).
After a few seconds, the
OPSYS NEEDED
prompt is
displayed giving you three procedure options.
To initiate the direct operating system download, press
the [0] key.
NOTE: At this point, any key entry other than those
prompted by the procedure is ‘INVALID’ until the
download operation is completed. (To stop the
procedure, you can disconnect the power from the
terminal and start over again at Step 1.)
5.
OPSYS NEEDED
ENTER * / 0 / #
At the
OPSYS NEEDED
prompt, press [0] to select
the operating system download by telephone option.
6. OPSYS NAME
This message is displayed if the name of the operating
system to be downloaded has not been entered in the
CONFIG.SYS file. For ZONTALK, the key for this
record is *OS.
Key in the name of the operating system and press
[FUNC/ENTER].
7. OPSYS ID
This message is displayed if the ID (serial number) of
the operating system to be downloaded has not been
entered in the CONFIG.SYS file. For ZONTALK, the
key for this record is *OT.
Key in the serial number of the operating system and
press [FUNC/ENTER].
Table 24 Operating System Download by Telephone
Display Action
O3200 RM Book.book Page 95 Thursday, April 29, 1999 3:48 PM