Specifications

Omni 3200 Reference Manual
102 Operating System Downloads
6a. Sending terminal:
DOWNLOAD DONE
(or)
DOWNLOAD FAILED
When the upload is complete, the message
DOWNLOAD DONE
is displayed and the sending
terminal returns automatically to the System Prompt.
If you see the prompt
DOWNLOAD FAILED
, press
[CLEAR], check all cable connections and repeat the
procedure.
NOTE: If you continue to have problems with the
operating system download, contact your local
VeriFone representative for assistance.
6b. Receiving terminal:
DOWNLOAD DONE
(or)
DOWNLOAD FAILED
When the download is complete, the message
DOWNLOAD DONE
is displayed. The new operating
system on the receiving terminal starts executing
automatically and the System Prompt is displayed.
If you see the prompt
DOWNLOAD FAILED,
press
[CLEAR], check all cable connections and repeat the
procedure.
7a. Sending terminal:
SYSTEM=
(Firmware ID)
At the end of a successful operating terminal-to-
terminal operating system download, the System
Prompt is displayed.
While the sending terminal is still in System Mode, you
can proceed to execute a direct application download.
7b. Receiving terminal:
SYSTEM=
(Firmware ID)
At the end of a successful terminal-to-terminal
operating system download, the System Prompt is
displayed.
NOTE: The Omni 3200 firmware version ID (the
8-character value in VPQXXYYZ format) that is
displayed as part of the System Prompt on the receiving
terminal should now be identical to the firmware ID of
the sending terminal.
At at the System Prompt, press [CLEAR] to exit
System Mode.
8. Receiving terminal:
DOWNLOAD NEEDED
When you exit System Mode on the receiving terminal,
the message
DOWNLOAD NEEDED
is displayed,
indicating that you must now download an application.
(The operating system upload erased the existing
application software.)
Table 25 Terminal-to-Terminal Operating System Upload
Display Action
O3200 RM Book.book Page 102 Thursday, April 29, 1999 3:48 PM