Specifications

Omni 3200 Reference Manual
116 Debugging an Application Program
Diagnostic Counters
The terminal firmware maintains internal counters to assist with the
remote diagnostic evaluation of the terminal operations. Counters 0
through 19 are reserved for monitoring the application program.
Diagnostic counters, listed in Table 28 below, enable the diagnostic
program running on the host computer to count the number of times
that various events occur on the terminal during a diagnostic or
debugging session.
Note: Diagnostic counters noted with an asterisk (*), 50–68, are not
supported for the Omni 3200 terminal.
Table 28 Diagnostic Counters
Counter Description of Event
0 – 19 (Used by application program)
20 Key presses
21 Power on cycles or system restarts
22 Exits from System Mode using the [CLEAR] key
23 ZONTALK 2000 downloads attempted
24 Direct connect uploads attempted
25 Direct connect downloads attempted
26 Normal beeps
27 Error beeps
28 Bar code reads attempted
29 Bar code reads with errors
30 Card reads attempted
31 Card reads with errors
32 Internal modem messages indicating OK
33 Internal modem messages indicating CONNECT
(at 300 baud)
34 Internal modem messages indicating RING DETECT
O3200 RM Book.book Page 116 Thursday, April 29, 1999 3:48 PM