Specifications

Appendix A. System Messages
A-7
MEMORY TEST
MEM WILL BE LOST
PRESS FUNC IF OK
These messages are displayed in sequence when you initiate a
Destructive Memory Test in System Mode by pressing the
[BACKSPACE] key. Press [FUNC/ENTER] if you want to proceed
with the test. To exit the test procedure and return to the System
Prompt, press any key other than [FUNC/ENTER].
Mo
Abbreviation for Monday. This appears as part of the date and time
prompt when you use the date/time function in System Mode.
NEW?
The terminal is requesting that you enter a new System Password.
Enter the new password and press [FUNC/ENTER]. (Be sure to write
down the new System Password and store it in a secure location.)
NO ANSWER
This prompt indicates that there was no answer when the terminal
modem attempted to dial a remote computer for a ZONTALK or
VeriTalk software download over a telephone line.
NO DATA
This error message is displayed during a card reader test in local
System Diagnostics mode ([4] key in System Mode) if no data can be
read from the card’s magnetic stripe. Try another card to make sure
the magnetic card is not defective.
NO DIALTONE
This message is displayed if the terminal modem attempts to dial the
telephone number of a remote computer and cannot get a dial tone on
the line to which it is connected. Check the telephone line using
another terminal or a telephone base unit.
O3200 RM Book.book Page 7 Thursday, April 29, 1999 3:48 PM