Specifications

Omni 3200 Reference Manual
34 About System Mode Procedure Descriptions
Each procedure takes you step-by-step through a complete System
Mode operation in the following sequence:
1. When the System Prompt is displayed, select an operation by
pressing the appropriate key,
2. Complete the operation, and
3. Return to the System Prompt.
Note: Before you proceed to enter System Mode and select the
function(s) you want to perform, please verify that you have
completely installed the Omni 3200, as described in Section 1 of this
manual, and that the terminal is connected to a power source.
Procedure descriptions are arranged in a two-column, tabular format:
The left-hand column, with the heading
Display
indicates what
appears on the terminal display at each step of the procedure. Please
note the following conventions that are used in the Display column:
• If a prompt or message appears on the screen exactly as it is
described, it is shown in the Display column in the Ariel font, and
in ALL CAPS. For example,
DOWNLOAD NEEDED
.
• If text in the Display column is enclosed in parentheses, it means
that the actual text or message may vary depending on the
terminal version you have. For example, (Application Prompt). In
this case, the normal font is used, and text is typed in Initial Caps.
Display Action
O3200 RM Book.book Page 34 Thursday, April 29, 1999 3:48 PM