Specifications

Performing System Mode Operations
[1]: Display EPROM Information 37
[1]: Display EPROM Information
Pressing the [1] key in System Mode displays the following
information about the flash EPROM in your Omni 3200 terminal:
• Flash EPROM creation date (11/11/98, for example)
• Initials of EPROM originator’s name (DM, for example)
• Four-digit TXO interpreter version number (5003, for example)
Note: If you contact your local VeriFone representative with
questions or problems concerning your Omni 3200 terminal, you may
be asked to supply this EPROM information.
Table 5 Display EPROM Information
Display Action
1.
SYSTEM=
(Firmware ID) Press [1] to display information about the terminal’s
flash EPROM.
2. (MM/DD/YY OO VVVV) The date on which the Omni 3200 firmware was loaded
into the EPROM, the initials of the person’s name who
performed the operation, and the version number of the
interpreter used are displayed in the following format:
MM/DD/YY OO VVVV, where
MM = Month
DD = Date
YY = Year
OO = Two-letter originator code (person’s initials)
VVVV = Four-digit interpreter version number
To end the procedure and return to the System Prompt,
press [CLEAR].
O3200 RM Book.book Page 37 Thursday, April 29, 1999 3:48 PM