Specifications

Omni 3200 Reference Manual
54 [BACKSPACE]: Initiate Destructive Memory Test
[BACKSPACE]: Initiate Destructive Memory Test
In System Mode, press [0] to initiate a destructive test of the
terminal’s application memory (SRAM).
Caution: This function deletes all data and files currently stored in
the terminal’s application memory, including protected CONFIG.SYS
records. Protected records have search keys that begin with an asterisk
(*) or a pound sign (#), such as *ZA. Do not perform this procedure if
you do not have a way to download a valid application program into
the terminal’s memory after the test is completed!
6.
SYSTEM=
(Firmware ID) The System Prompt is displayed when the password
modification is complete. The next time you enter
System Mode, you will have to enter the new System
Password.
You can now select another System Mode function or
press [CLEAR] to exit System Mode and restart the
terminal application.
Table 16 Change the System Password
Display Action
Table 17 Initiate Destructive Memory Test
Display Action
1.
SYSTEM=
(Firmware ID) Press [BACKSPACE] to initiate the destructive
memory test.
2.
MEMORY TEST
MEM WILL BE LOST
PRESS FUNC IF OK
Three prompts are displayed to warn you that a
destructive memory test has been initiated, and to
inform you that the contents of the SRAM will be lost if
you proceed with the test.
Press [FUNC/ENTER] to proceed with the test.
To end the memory test and return to the System
Prompt prompt, press any key on the core keypad other
than [FUNC/ENTER].
O3200 RM Book.book Page 54 Thursday, April 29, 1999 3:48 PM