Specifications

Performing Downloads
Application Downloads 77
Table 21 Application Download by Telephone (Using ZONTALK)
Display Action
1.
SYSTEM=
(Firmware ID) Press [0] to initiate a full or partial application
download over a telephone line connection.
NOTE: If the terminal’s CONFIG.SYS file does not
contain values for the *ZP, *ZT, and *ZA variables,
you will be prompted to enter this information in the
next step.
2.
*ZP=
(and/or)
*ZT=
(and/or)
*ZA=
If one or more of the required ZONTALK variables are
missing from the terminal’s CONFIG.SYS file, you are
now prompted to enter this information from the core
keypad:
•If
*ZP=
, key in the download computer’s complete
dial-up phone number and press [FUNC/ENTER].
•If
*ZT=
, key in the terminal ID and press [FUNC/
ENTER].
•If
*ZA=
, key in the application ID of the program
used by your terminal and press [FUNC/ENTER].
3.
ZONTALK DOWNLOAD
When the terminal confirms that the required *ZP, *ZT,
and *ZA variables are present in the CONFIG.SYS file,
the message
ZONTALK DOWNLOAD
is displayed
briefly to indicate this fact.
4.
PARTIAL OR FULL?
(alternating with)
PART=* FULL=FUNC
The prompts
PARTIAL OR FULL?
and
PART=*
FULL=FUNC
alternate on the terminal display, asking
you to select the type of application download you
want: partial or full:
– To choose a partial download, press [*].
– To choose a full download, press [FUNC/ENTER].
The terminal then attempts to establish the dial-up
telephone connection to the remote download
computer.
O3200 RM Book.book Page 77 Thursday, April 29, 1999 3:48 PM