Specifications

Performing Downloads
Application Downloads 83
2a. Receiving terminal:
UNIT RECEIVE
(then)
FFFFFF
(Memory block address)
The
UNIT RECEIVE
prompt is displayed on the
receiving terminal until the upload begins.
The same continuously updating hexadecimal value is
also displayed on the receiving terminal to indicate the
address of the memory block current being received.
3a. Sending terminal:
DOWNLOAD DONE CP
(or)
DOWNLOAD FAILED
When the upload is successfully completed, the
DOWNLOAD DONE CP
message is displayed on
the sending terminal, indicating that the clock value (C)
and the System Password (P) were modified on the
receiving terminal.
NOTE: If the message
DOWNLOAD FAILED
is
displayed on either terminal, check the cable
connection and try again. If the problem persists,
contact your local VeriFone representative for
assistance.
3b. Receiving terminal:
DOWNLOAD DONE CP
(or)
DOWNLOAD FAILED
When the upload is successfully received, the
DOWNLOAD DONE CP
message is displayed on
the receiving terminal, indicating that its clock value
(
C
) and the System Password (
P
) were modified by the
upload.
4a. Sending terminal:
SYSTEM=
(Firmware ID)
If the download is successful, the sending terminal
automatically returns to the System Prompt. To exit
System Mode, press [CLEAR].
4b. Receiving terminal:
SYSTEM=
(Firmware ID)
If the download is successful, press [CLEAR] on the
receiving terminal to return to the System Prompt.
Press [CLEAR] again to exit System Mode and start the
application program.
Table 22 Terminal-to-Terminal Application Upload
Display Action
O3200 RM Book.book Page 83 Thursday, April 29, 1999 3:48 PM