Installation guide

Omni 3200M Installation Guide

Set Up a Direct Connection

To set up a direct telephone line connection from the Omni

3200M to a telephone company wall jack (see Figure 7):

1. Insert the connector on one end of the

telephone line cord into the Telco port on the

back panel of the terminal. (The Telco port is

identified by the icon shown to the right.)

2. Insert the connector on the other end of the telephone line

cord into a RJ11-type telephone company wall jack. (If

you do not have this type of modular wall jack, you can

obtain an adapter from a local business supply store.)

Figure 7 Direct Telephone Line Connection

Set Up a Pass-Through Connection

To set up a pass-through telephone line connection from the

Omni 3200M to a telephone base unit (see Figure 8):