Installation guide

23
Omni 3200M Installation Guide
Cleaning the Printer
Every few months, check and thoroughly clean the integrated
thermal printer:
1. Be sure the terminal is connected to a power source.
2. Remove the paper roll cover.
3. Lift out the paper roll and spindle from the paper roll
cradle, if necessary. Carefully cut the paper that is still
inserted in the feed mechanism from the roll.
4. Press the paper feed button to eject the remaining paper
from the feed mechanism.
Caution: Do not attempt to pull paper out from the back of the
printer. This could damage the paper feed mechanism.
5. Remove any dirt, dust, or scraps of paper that may be
adhering to, or lodged in, the printer parts.
6. Re-install the paper roll, or install a new roll, as described
in “Installing a Paper Roll” on page 20.
7. Press the paper feed button to advance the paper through
the slot below the serrated metal tear strip and then replace
the paper roll cover.
Troubleshooting
During normal, day-to-day operation of your Omni 3200M
terminal, it is possible that minor malfunctions may occur.
Here are some examples of possible problems, and steps you
can take to quickly resolve them.