Specifications

PERFORMING DOWNLOADS
Back-to-Back Application Downloads
114 OMNI 37XX REFERENCE MANUAL
Download Application Files to Target Terminal
1 Configure a Gold terminal for an application download operation to a
deployment terminal:
• If the *FA variable (if present in the application) is set to 1, you can reset it
to 0. For more information on the *FA variable, refer to the
Verix
Programmer’s Manual
(VPN 19733).
• Ensure the download is exactly what you want your Target terminals to
receive.
• Ensure that previously authenticated files are not changed prior to the file
transfer operation.
2 Configure the Target terminal to receive an application download from the
Gold terminal. From
SYS MODE MENU 2, set Group 1 and the COM1 port to
receive the file transfer.
3 Connect a cable (VPN 05651-xx) between the RS232 serial ports of the Gold
and Target terminals.
4 From any system mode menu on the Gold terminal, press [*] and enter the
GID1 password to initiate the file transfer.
5 From SYS MODE MENU 2 on the deployment terminal, select either a full or a
partial download. The Gold terminal begins to transfer files to the Target
terminal.
Figure 23 illustrates these two phases and how they relate to each other.