Specifications

System Messages
O
MNI 37XX REFERENCE MANUAL 127
The DEBUGGER F4 option in SYS MODE MENU 4 was selected. The debugging monitor
program, DBMON.OUT, is included in the SDK, but is not stored in the terminal
memory of a factory unit. To use the debugging tool, you must sign, download,
and authenticate the DBMON.OUT application.
This message displays if you select
REMOTE DIAGS F2 in SYS MODE MENU 4 and the
(optional) Terminal Management Agent (TMA) software is not resident in the
Omni 37xx terminal. The TMA software is required to perform remote diagnostics.
For more information about support for remote diagnostics, contact your VeriFone
service provider.
This message displays when you select CONFIG INFO F2 in SYS MODE MENU 3 and
press the PF2 key (below the down arrow) two times. This third display, in a series
of four, provides the following information about the current terminal configuration:
• MODL: The 12-digit model number assigned to the terminal on manufacture.
• CTRY: The name or abbreviation (up to 42 characters) of the country of
manufacture.
• KEYPAD: A 1-digit code (0–5) to indicate keypad type.
• DISPLAY: A 6-digit code (000000, 000001, or xxxyyy) to indicate display unit
type.
• MAG RDR: A 1-digit code (0–4) to indicate magnetic stripe card reader type.
• PRINTER: A 1-digit code (0 or 1) to indicate that a thermal printer is integrated.
LOAD DBMON.OUT
LOAD TERMINAL
MANAGEMENT AGENT
MODL
CTRY
KEYPAD
DISPLAY
MAG RDR
PRINTER