Specifications

System Messages
O
MNI 37XX REFERENCE MANUAL 129
A corrupt file is detected in the RAM file system at terminal start up, after power-
on, or during restart. This message may indicate a hardware problem or the error
condition may be resolved through another download of the file.
This message displays when you select
CONFIG INFO F2 in SYS MODE MENU 3. This
first display, in a series of four, provides the following information about the
current terminal configuration:
• INUSE: The number of bytes of memory space currently being used in the RAM
file system (
RAM FILES) or the flash file system (FLASH FILES).
• AVAIL: The number of bytes of memory space currently available in the RAM
file system (
RAM FILES) or the flash file system (FLASH FILES).
In back-to-back downloads, the Target (receiving) terminal displays this message
on data transfer initiation when pressing the asterisk key (
*). To stop the upload,
press the cancel key on either terminal (Gold or Target).
This message displays when you select
FLASH FILES F4 in SYS MODE MENU 2 and
select CLEAR GROUP_nn F2 or CLEAR ALL FILES F3 to clear files from the flash
memory of a specific file group (Group 1–15) or from the entire flash memory. This
message remains until the files either within the file group or all files in flash are
deleted.
If you select
CLEAR ALL FILES F3, only application file(s) stored in the flash-based
file system—not the files stored in RAM—are erased.
RAM CHKSUM ERROR
RAM FILES
INUSE
AVAIL
FLASH FILES
INUSE
AVAIL
RECEIVING NOW
SYS MODE CLEAR
CLEARING FLASH
PLEASE WAIT