Specifications

System Messages
130 OMNI 37XX REFERENCE MANUAL
This message displays when you select RAM FILES F3 in SYS MODE MENU 2 and
select CLEAR GROUP_nn F2 or CLEAR ALL FILES F3 to clear files from the RAM of a
specific file group (Group 1–15) or from the entire RAM. This message remains
until the files either within the file group or all files in RAM are deleted.
If you select
CLEAR ALL FILES F3, only the application file(s) stored in RAM—not
the files stored in flash—are erased. If you erase the main application stored in
the RAM file system, the terminal displays
DOWNLOAD NEEDED after the VeriFone
copyright screen on terminal restart.
Note that clearing the RAM does
not erase the keyed variable settings stored in
protected CONFIG.SYS records—that is, in records that start with an asterisk (*).
This message displays when you select
FLASH FILES F4, followed by DEFRAG F4 in
SYS MODE MENU 2 to perform defragmentation (coalesce) of the flash memory file
system.
PLEASE WAIT remains displayed during the defragmentation process. On
successful completion, the terminal automatically restarts.
An application is being downloaded to a
receiving Omni 37xx terminal from a host
PC, either directly over a serial cable or by telephone. This message also displays
on the Target terminal in a back-to-back download. The message also indicates
the Group ID into which the application is being downloaded.
The terminal displays a series of asterisks (*) to indicate the progress of the
download (each asterisk represents 10% of the file is downloaded). When ten
asterisks appear, the data transfer is complete.
SYS MODE CLEAR
CLEARING RAM
PLEASE WAIT
SYS MODE DEFRAG
RECLAIMING FLASH
PLEASE WAIT
SYS MODE DOWNLOAD G _1
DOWNLOADING NOW