Specifications

OMNI 37XX REFERENCE MANUAL 17
CHAPTER 2
Terminal Setup
This chapter describes the terminal setup procedure. You will learn how to:
• Select a location and protect the terminal from adverse Environmental
Factors. See Select Terminal Location.
• Unpack the shipping carton. See Unpack the Shipping Carton.
• Establish telephone line connections. See Establish Telephone Line
Connections.
• Install paper roll in the printer. See Install Paper Roll.
• Configure optional peripheral devices. See Connect Optional Device(s).
• Establish power connections. See Connect Terminal Power Pack.
Select Terminal
Location
Use the following guidelines described while selecting a location for your
Omni 37xx terminal.
Ease of Use • Select a location convenient for both merchant and cardholder.
• Select a flat support surface, such as a countertop or table.
• Select a location near a power outlet and a telephone/modem line connection.
For safety, do not string the power cable in a walkway or place across a
walkway on the floor.
Environmental
Factors
• Do not use the terminal where there is high heat, dust, humidity, moisture, or
caustic chemicals or oils.
• Keep the terminal away from direct sunlight and anything that radiates heat,
such as a stove or a motor.
• Do not use the terminal outdoors.
Electrical
Considerations
• Avoid using this product during electrical storms.
• Avoid locations near electrical appliances or other devices that cause
excessive voltage fluctuations or emit electrical noise (for example, air
conditioners, electric motors, neon signs, high-frequency or magnetic security
devices, or computer equipment).
CAUTION
The terminal is not waterproof or dustproof, and is intended for indoor use only.
Any damage to the unit from exposure to rain or dust may void any warranty.