Specifications

TERMINAL SETUP
Install Paper Roll
20 OMNI 37XX REFERENCE MANUAL
To Install a Paper Roll
1 Turn on the terminal. The green LED indicator will blink on and off, indicating
that the printer needs paper.
2 Press the button on the side of the terminal to unlatch the paper roll cover,
then rotate the cover up and back (see Figure 3).
Figure 3 Printer Latch Button
3 Remove partial rolls of paper in the printer tray by lifting up (see Figure 4).
Figure 4 Removing Partial Paper Roll
4 Loosen the glued leading edge of the paper or remove the protective strip
from the new roll of paper and cut a straight edge across its leading end.
5 Hold the roll so the paper feeds from the bottom of the roll.
6 Drop the paper roll into the printer tray, leaving 7 centimeters (about two
inches) of paper sticking up past the serrated metal tear strip (see Figure 5).