Specifications

TERMINAL SETUP
Connect Terminal Power Pack
O
MNI 37XX REFERENCE MANUAL 25
Figure 11 CR 600 Check Reader Connection
External Printers
Supported
Although most Omni 37xx variants have an internal thermal printer, it may be
convenient to print larger print runs (for example, daily, or weekly reports) to an
external printer. The Omni 37xx terminal supports the P250, P350,P900, and
P950 VeriFone external printers. Contact your VeriFone representative or visit the
online store at
www.store.verifone.com for information on these devices.
External printer connections are through the same port as check readers (see
Figure 11).
Connect
Terminal Power
Pack
When you have finished connecting optional peripheral(s), you are ready to
connect the Omni 37xx terminal to a power source.
1 Insert the round barrel connector (see Figure 12) into the power port,
identified by the icon at right.
CAUTION
Using an incorrectly rated power supply may damage the terminal or cause it not
to work as specified. Before connecting, ensure that the power supply being used
to power the terminal matches the requirements specified at the back of the
terminal (see Specifications for detailed power supply specifications). Obtain the
appropriately rated power supply before continuing.
WARNING
Do not connect the terminal to the power supply until all the peripherals are
attached.
NOTE
The round barrel connector on the power pack cable has a plastic lock tab that
secures the power cable to the terminal.