Specifications

SYSTEM MODE
System Mode Menus
42 OMNI 37XX REFERENCE MANUAL
SYS MODE DOWNLOAD G _1
MODEM F2
COM1 F3
COM2 F4
↑
Select a download mode: MODEM F2, COM1 F3, or COM2
F4
.
To return to the main menu without saving your
selection, press the cancel key.
SYS MODE DOWNLOAD G _1
***-------
DOWNLOADING NOW
The terminal is ready to receive a download. During
the download, a line of asterisks appears that shows
percentage of completion. Each asterisk equals
approximately 10% of the download.
You can cancel a download by pressing the cancel
key during the download; doing so restarts your
terminal.
RAM FILES F3
SYS MODE RAM
CLEAR GROUP _1 F2
CLEAR ALL FILES F3
To clear a file group’s RAM files, type the file group
number (1–15) and press F2. To correct a mistake,
press [
←] to delete the number, and type a new entry.
CONFIG.SYS protected records that begin with * or #
are retained when you clear a RAM file group.
To clear the RAM of all file groups, select
CLEAR ALL
FILES F3
. This operation also clears the
CONFIG.SYS files from all groups except Group 1.
Records that begin with * or # in Group 1 are retained.
Note: If you have not previously entered a group’s
password in this session, the terminal
prompts for the group’s password prior to
clearing that group’s RAM files.
SYSTEM MODE FILE
GROUP nn PASSWORD
----------
To continue, enter the required password. If you enter
an incorrect password, the following message
appears:
SYS MODE PASSWORD
PLEASE TRY AGAIN
Press [↵]. Verify your password and re-enter it.
SYS MODE CONFIRM G 1
CANCEL F3
CONFIRM F4
To cancel the operation, select CANCEL F3.
To continue the operation, select
CONFIRM F4. After
the operation is complete, you return to the main
menu.
Table 9 System Mode Menu 2
Display Action