Specifications

SYSTEM MODE
System Mode Menus
O
MNI 37XX REFERENCE MANUAL 43
FLASH FILES F4
SYS MODE FLASH
CLEAR GROUP _1 F2
CLEAR ALL FILES F3
DEFRAG 0 F4
To clear a file group’s flash files, type the file group
number (1–15) and press F2. To correct a mistake,
press [
←] to delete the number, and type a new entry.
To clear the flash files of all file groups, press F3. If
you have not previously entered a group’s password
in this session, the terminal prompts you for the
group’s password prior to clearing that group’s flash
files.
Caution: Clearing all flash files erases the application
program from your terminal. A new
application download is then required.
To defragment flash files, press F4, then skip to
SYS MODE CONFIRM of this procedure.
The number displayed beside
DEFRAG is the total
amount of space, in bytes, to reclaim in the defrag
operation.
SYSTEM MODE FILE
GROUP nn PASSWORD
----------
To continue, enter the required password. If you enter
an incorrect password, the following message
appears:
SYS MODE PASSWORD
PLEASE TRY AGAIN
Press [↵]. Verify your password and re-enter it.
SYS MODE CONFIRM G 1
CANCEL F3
CONFIRM F4
To cancel the operation, select CANCEL F3. To
continue the operation, select
CONFIRM F4. After the
operation is completed, you are returned to the main
SYS MODE MENU 2 screen.
If you selected
DEFRAG in SYS MODE FLASH and select
CONFIRM F4 here, you are taken to SYS MODE DEFRAG.
SYS MODE CLEAR
CLEARING FLASH
PLEASE WAIT
This operation may take a few seconds. If you have
cleared all flash files, the terminal displays
DOWNLOAD
NEEDED
on restart.
If after clearing selected flash files you experience
difficulties with your application, you may have
accidentally deleted a flash file that the CONFIG.SYS
file in File Group 1 uses. This type of error usually
generates the error message
RUN FAILED when trying
to execute the application; you must restore the
required File Group 1 flash file.
SYS MODE DEFRAG
RECLAIMING FLASH
PLEASE WAIT
This message indicates the flash files are being
defragmented; this operation may take a few
seconds.
On successful completion, the terminal automatically
restarts.
Table 9 System Mode Menu 2
Display Action