Specifications

SYSTEM MODE
System Mode Menus
44 OMNI 37XX REFERENCE MANUAL
System Mode
Menu 3
In this menu, you can view terminal configuration information, edit the
CONFIG.SYS or another keyed file, and change system mode and file group
passwords.
NOTE
Some application program downloads automatically reset the system password.
Table 10 System Mode Menu 3
Display Action
SYS MODE MENU 3
CONFIG INFO F2
EDIT F3
PASSWORDS F4
↑↓
To view terminal configuration information, select
CONFIG INFO F2. To edit the CONFIG.SYS or
another keyed file, or to set the country code for
your terminal’s modem, select
EDIT F3. (For more
information, refer to the Edit Keyed Files section
that follows this main menu description.)
To change the system mode and file group
passwords, select
PASSWORDS F4. Group 1 and
system mode all use a default password that is pre-
set at the factory: Z66831. It is entered as:
1 ALPHA ALPHA 6 6 8 3 1 and press [
↵]. The
default passwords for Groups 2-15 are blank or
empty, and entering the password is accomplished
by pressing the enter key. To change passwords,
refer to the procedure PASSWORDS F4.
To return to the previous system mode menu, press
the PF1 key.
To return immediately to
SYS MODE MENU 1, or to
quit any operation within this menu, press the
cancel key.
To toggle to the system mode menu 4, press the
PF2 key or [
↵].
CONFIG INFO F2
SYS MODE CONF
RAM FILES 22
INUSE 48834
AVAIL 390010
FLASH FILES 1
INUSE 5680
AVAIL 715208
↓
This screen shows the number of kilobytes in use
and that available for RAM and flash.
To continue, press the PF2 key.