Specifications

SYSTEM MODE
System Mode Menus
O
MNI 37XX REFERENCE MANUAL 45
SYS MODE CONF
RAM 512
FLASH 1024
SERNO xxxxxxxxx
PTID 12000000
PART xxxxxxxxx
VERS A
↑↓
This screen shows configuration information
specific to your terminal:
• Total kilobytes of RAM memory
• Total kilobytes of flash memory
• Serial number
• Permanent terminal identification number (PTID)
• Terminal part number
• Terminal hardware version number
Your terminal’s screen may vary depending on your
terminal’s model and the operating system version
installed.
To return to the previous menu, press the PF1 key;
to continue, press the PF2 key.
SYS MODE CONF
MODL OMNI3700
CTRY US
KEYPAD 0
DISPLAY 128064
MAG RDR 0
PRINTER 1
↑↓
This screen shows additional configuration
information specific to your terminal:
• Model number
• Country of manufacture
• Keypad type (0 = Telco, 1 = calculator,
2 = Singapore)
• Display unit type
• Magnetic stripe card reader type
• Whether or not a thermal printer is integrated into
the terminal (where 0 = No, 1 = Yes)
To return to the previous menu, select the PF1 key;
to continue, select the PF2 key.
To return to the main menu, press the cancel key.
SYS MODE CONF
PINPAD 1
LIFE 26778
RSET 971117023334
RCNT 90
MODEM 22
MODEM TYPE 2
↑
This screen shows additional configuration
information specific to your terminal:
• Whether or not a PIN pad device is integrated
into the terminal (where 0 = No, 1 = Yes)
• Number of seconds the terminal has run (LIFE)
• Last reset date and time, in YYMMDDHHMMSS
format (where YY = year, MM = month, DD = day,
HH = hour, MM = minute, and SS = second)
• Number of times the terminal has been reset
(
RCNT)
• Modem country code
• Modem type (2400bps, 14.4kbps, ISDN, etc.)
To return to the previous menu, select the PF1 key;
to return to the main menu, press the cancel key.
Table 10 System Mode Menu 3
Display Action