User`s guide

Emdeon Vx570 User’s Guide

Chapter 1: Install Your Equipment

Page 4

This material contains confidential, proprietary information. Unauthorized use or disclosure of the information is strictly prohibited.

Modem Network Connection

If you use a high-speed modem or router to connect to a network, you will need an RJ45 network cable

(not included with your terminal).

1. Attach one end of the cable to your high-speed modem or router.

2. Connect the other end of the cable to the terminal 10BaseT outlet, as illustrated below.

Testing the Connection

1. Press the asterisk key (*) until the Terminal Main Menu displays:

2. Press <F2> to select CommServer.

3. If Connected indicates YES, press * to return to the Main Menu. Your network connection has

been successfully established.

4. If Connected indicates NO, disconnect and reconnect the power cable, and press <F2> from the

Main Menu to return to CommServer.

5. If Connected still indicates NO, press <Scroll Line h > to select Diag.

6. Press <F2> to select Ping.

7. At the Enter Ping Address prompt, just press . The PING address is pre-configured.

8. If No Response or other error message is displayed, call Emdeon Customer Service at 800-333-

0263.