User Manual Part 2

17
Omni 3600 Installation Guide
Smart Battery Installation
The smart battery installs in a slot on the back of the terminal,
as shown in Figure 4. The locking tab clicks when the battery
is in place. The slot is keyed, so that there is only one proper
way to insert the battery.
Figure 4 Install the Smart Battery
Smart Battery Charging
You must charge smart battery prior to initial use. After
unpacking your Omni 3600 terminal, install the battery and
connect the power pack to the unit. It is recommended that the
battery receive a periodic full discharge.
NOTE
Allow the Omni 3600 terminal to remain
connected to the power pack for a minimum
of 2 hours, maximum of 4 hours to ensure the
battery receives a full charge.