User Manual Part 3

Omni 3600 Installation Guide
28
5 Install an MSAM card by aligning the card and carefully
sliding it within the guides on the cover until fully inserted.
6 Close the cover (Figure 14).
7 Lock each MSAM cardholder by sliding its locking plate
towards the LOCK arrow until the plate stops (Figure 13).
8 Close the MSAM door.
9 Replace the smart battery.
Install/Replace SIM Card (GSM models)
The SIM (Subscriber Identity Module) card is a smart card
inserted in the Omni 3600 GSM terminal that contains your
GSM radio account information. Use the following procedure
to replace or install a SIM card.
1 Remove screw from SIM card access door on back of
Omni 3600 terminal (Figure 15).
NOTE
The cardholder has a set of contacts and a notch on one
corner to ensure the MSAM card is positioned correctly
when the cover is closed. The MSAM card has a notch
on one corner to ensure it is correctly positioned in the
cardholder. Before inserting the MSAM card, position it
as shown in Figure 14.
CAUTION
To avoid damage to the MSAM cardholders, ensure
each cardholder is locked before closing the MSAM
door.