User Manual Part 3

Omni 3600 Installation Guide

Figure 5 Smart Battery Charge Indicator LEDs and Test Button

Turn On/Off the Omni 3600 Terminal

When the smart battery completes its initial charge, turn on the

Omni 3600 terminal by pressing the green

ENTER/ON key (icon

at left) for approximately 3 sec. The display screen lights and

displays the initial VeriFone copyright screen. If an application

is loaded in the terminal, it starts after the initial VeriFone

application is loaded in the terminal,

DOWNLOAD NEEDED

appears on screen after the initial VeriFone copyright screen.

Turn off the Omni 3600 terminal by pressing the red

CANCEL/

OFF key (icon at left) continuously until the cancel tone is heard

(approximately 4 sec.). First a series of beeps is heard, then

the cancel tone. The unit then shuts off.

Paper Installation

The internal thermal printer uses a roll of single-ply, thermal-

sensitive paper, approximately 57 millimeters (2.25 inches)

wide and 25–33 meters (82–108.26 feet) long. A pink out-of-

paper indicator line appears on the edge of the paper

approximately 18 inches before the end of the roll. After this

line appears, there is enough paper remaining on the roll to

conclude at least one transaction.

BATTERY CHARGE STATE

TEST BUTTON AND

STATUS INDICATOR LEDS