User's Manual Part 1

OMNI 3600 TERMINAL AND OMNI 3600 BASE INSTALLATION
Omni 3600 Terminal
8 OMNI 3600 REFERENCE MANUAL
Never place the terminal in direct sunlight.
Keep the Omni 3600 terminal and Omni 3600 base away from anything that
radiates heat, such as a stove or motor.
Convenience
Omni 3600 Terminal
Keep the Omni 3600 terminal with you to perform transactions. When plugging the
Omni 3600 terminal into the power pack, ensure that the unit is placed close
enough to a power outlet so that the power cable readily reaches the unit. For
safety, do not string the power cable in a walkway or place across a walkway on
the floor.
Omni 3600 Base
Locate the Omni 3600 base so that you can readily dock the Omni 3600 terminal
on the cradle for recharging and downloading. Again, for safety, ensure that the
power cable readily reaches the Omni 3600 base unit, so as not to trip or interfere
in any way in a busy location.
Omni 3600
Terminal
This section discusses the features of the Omni 3600 terminal, including
providing power to the Omni 3600 terminal,
charging the smart battery,
installing paper,
installing MSAM cards, and
completing magnetic card and smart card transactions.
Unpack the
Shipping Carton
Open the shipping carton and carefully inspect the contents for possible
tampering or shipping damage (Figure 1).
CAUTION
Do not use the Omni 3600 terminal or Omni 3600 base outdoors. They are for
indoor use only, and are not waterproof or dustproof. Damage to the unit from
exposure to sun, rain, or dust may void your warranty.
WARNING
Do not use the Omni 3600 terminal or Omni 3600 base near water, including a
bathtub, wash bowl, kitchen sink or laundry tub, in a wet basement, or near a
swimming pool. Avoid using these products during electrical storms.