User's Manual Part 2

OMNI 3600 TERMINAL AND OMNI 3600 BASE INSTALLATION
Omni 3600 Base
26 OMNI 3600 REFERENCE MANUAL
Power Connection
The Omni 3600 base unit must be plugged in to a power outlet to
• recharge a smart battery in a docked terminal,
• charge spare smart batteries,
• communicate with peripheral devices, and
• establish Telco host connections.
Figure 23 Power Pack Connection (Docked Terminal)
To connect the Omni 3600 base to power (Figure 23):
1 Insert the round barrel connector into the power port (icon at left) on the far
right of the Omni 3600 base.
2 Insert the power cable into the power pack.
3 Plug the power cable into a wall outlet or surge protector. When the
Omni 3600 base is powered, the far-right LED (icon at left) lights steady
green.
WARNING
Do not plug the power pack into an outdoor outlet.
NOTE
It is recommended that the power pack be plugged into a power surge protector to
protect against possible damage caused by lightning strikes and electrical surges.