User's Manual Part 2

OMNI 3600 TERMINAL AND OMNI 3600 BASE INSTALLATION
Omni 3600 Base
O
MNI 3600 REFERENCE MANUAL 29
Figure 26 Direct Connection
Pass-through connection — Run a telephone cord from the Telco port on the
Omni 3600 base to the RJ11 jack on a standard telephone (Figure 27). Do not
string the telephone cord across a walkway or place it so as to interfere in high-
traffic areas. With a pass-through connection, the phone line is busy during
downloads.
Figure 27 Pass-through Connection
Peripheral Devices
The Omni 3600 base supports a line of VeriFone peripheral devices designed to
use with point-of-sale terminals. Use the RS-232 port on the back panel of the
Omni 3600 base to connect these optional devices.
The following sections discuss the optional devices supported by the Omni 3600.
Other optional devices may be supported. For more information, please contact
your VeriFone distributor.
Optional Peripheral Device Port
Right of the RJ11 ports is a RJ45-type modular jack (serial port), labeled RS232:
• The RS232 serial port (icon shown at left) connects a VeriFone CR 600 check
reader or other peripheral device to the Omni 3600 base
The Omni 3600 base does not support external PIN pad devices.